CVE Database

OpenClaw before 2026.5.18 contains an insufficient provenance validation vulnerability in node event handling that allows paired nodes to forge exec lifecycle events without system.run authorization. A malicious or compromised paired node can send crafted node.event messages to the gateway, steering target sessions into exec-event paths that expose capabilities the reduced node surface should not provide.

OpenClaw before 2026.5.19 contains an authorization bypass vulnerability in message read actions that skips channel allowlist checks. Lower-trust callers can request messages from channels not intended for them by exploiting insufficient validation in the affected feature, potentially exposing sensitive channel messages.

OpenClaw before 2026.5.18 contains a server-side request forgery vulnerability in browser control that allows authenticated users to bypass private-network navigation checks through Playwright act interactions. Attackers can trigger navigation to private-network targets via action-triggered redirects and subsequently read restricted page content using browser evaluation capabilities.

OpenClaw before 2026.4.25 contains a policy bypass vulnerability in embedded runner policy that allows requests using provider aliases to compare against aliases instead of canonical provider identities. Attackers can exploit this confusion to select bundled tool access outside intended provider policy restrictions when the affected feature is enabled.

OpenClaw before 2026.5.6 contains an approval policy bypass vulnerability in the Skill Workshop apply flow that allows agent tool calls to set apply: true despite approvalPolicy: pending configuration. Attackers can exploit this by reaching the affected apply path to apply workshop changes before the expected approval step, potentially modifying configurations without proper authorization.

OpenClaw before 2026.5.6 contains an authorization bypass vulnerability in Telegram interactive callbacks that allows authenticated users to skip commands.allowFrom validation. Attackers can invoke affected callbacks to mark themselves as authorized senders before allowlist checks are applied, triggering command behavior outside configured Telegram sender restrictions.

Summarize before 0.17.0 contains a server-side request forgery vulnerability that allows attackers who control a podcast RSS feed to direct the host to fetch transcript content from loopback addresses, link-local addresses, RFC 1918 private ranges, or other reserved destinations by supplying malicious podcast:transcript URL values. Attackers can bypass protections through DNS rebinding and redirect-based techniques, as redirect targets are not revalidated and hostnames are not resolved before request dispatch, exposing internal service responses through the summarization flow.

SolidInvoice is an open-source invoicing platform. Prior to version 2.3.17, the company logo upload feature accepts any file type without validation. An authenticated administrator can upload an SVG file containing embedded JavaScript. This script is base64-encoded and injected unescaped into every page of the application, causing stored cross-site scripting (XSS) that executes in every authenticated user's browser. This issue has been patched in version 2.3.17.

FPDI is a collection of PHP classes that facilitate reading pages from existing PDF documents and using them as templates in FPDF. Prior to version 2.6.7, an attacker can upload a small, malicious PDF file that will cause the server-side script to crash due to memory exhaustion or a script time-out. Repeated attacks can lead to sustained service unavailability. This issue has been patched in version 2.6.7.

Vim is an open source, command line text editor. Prior to version 9.2.0597, Vim's Python omni-completion executes reconstructed function and class definitions from the current buffer with exec() as part of populating the completion dictionary. Python evaluates function default values, parameter annotations, and class base expressions at definition time, so a hostile buffer can execute attacker-controlled Python expressions during omni-completion. The existing g:pythoncomplete_allow_import mitigation (GHSA-52mc-rq6p-rc7c) does not cover this path, because the attacker-controlled code is not a harvested import/from statement. This issue has been patched in version 9.2.0597.

Vim is an open source, command line text editor. Prior to version 9.2.0561, the Python omni-completion script in python3complete.vim for Vim with the +python3 interpreter enabled (and the legacy pythoncomplete.vim for builds with the +python interpreter) executes the import and from statements found in the current buffer through Python's import machinery. Because the buffer's working directory is on sys.path, opening a hostile .py file with a sibling Python package and invoking omni-completion runs that package's top-level code as the editing user. This issue has been patched in version 9.2.0561.

KanaDojo contains a command injection vulnerability that allows an attacker with pull request access to execute arbitrary shell commands by inserting shell metacharacters into the version or changes fields of patchNotesData.json, which are interpolated unsanitized into a child_process.execSync() call in the release.yml workflow. Attackers can have a malicious pull request merged to trigger the GitHub Actions runner with contents write permissions and access to GITHUB_TOKEN.

PenguinMod-BackendApi is the backend api for penguinmod. Prior to version 1.0.0, a NoSQL injection vulnerability in the password reset endpoint allows any authenticated user to change the password of an account, leading to full account takeover. An attacker only needs a registered account and a valid password reset token for their own account. This issue has been patched in version 1.0.0.

Garlic-Hub manages digital signage network — devices, content, and playlists — from a single self-hosted interface. Prior to version 1.1, authenticated users can cause the server to issue arbitrary HTTP requests to internal services via the uploadFromUrl endpoint. This allows internal port scanning, service fingerprinting, and retrieval of internal HTTP responses which are stored in the publicly accessible media pool. This issue has been patched in version 1.1.

Vim is an open source, command line text editor. Prior to version 9.2.0496, a code injection vulnerability exists in s:stepmatch() in the cucumber filetype plugin (runtime/ftplugin/cucumber.vim) on Vim builds with +ruby support. Step-definition patterns read from .rb files under the repository's features/*/ or stories/*/ directories are embedded into a Ruby Kernel.eval argument without sufficient escaping, allowing a crafted pattern in an attacker-controlled repository to execute arbitrary Ruby (and through it arbitrary shell commands) when the user invokes a step-jump mapping ([d, ]d). This issue has been patched in version 9.2.0496.

Quest Bot is an opensource modern Discord Bot built for moderation, utilities and support. Prior to version 1.0.1, any guild member who can invoke slash commands can use /automod add, /automod remove, and /automod list because the command has no Discord default permission requirement and no runtime moderator permission check. An attacker can add a rule matching common text and make the bot delete other users’ messages. This issue has been patched in version 1.0.1.

Vim is an open source, command line text editor. Prior to version 9.2.0495, a Vimscript code injection vulnerability exists in s:NetrwBookHistSave() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when serializing browsed directory paths to the history file ~/.vim/.netrwhist. A directory name derived from the filesystem is interpolated into a single-quoted Vimscript string literal without escaping embedded single quotes, allowing a crafted directory name to break out of the string context and execute arbitrary Vimscript, including shell commands via system() and :!, the next time the history file is sourced. This issue has been patched in version 9.2.0495.

mcp-server-kubernetes is a Model Context Protocol server for Kubernetes cluster management. Prior to version 3.6.0, mcp-server-kubernetes exposes three environment variables (ALLOW_ONLY_READONLY_TOOLS, ALLOW_ONLY_NON_DESTRUCTIVE_TOOLS, ALLOWED_TOOLS) documented as access controls for restricting which Kubernetes operations are available. These controls are enforced at the tool discovery layer (tools/list) but not at the execution layer (tools/call). Any client that knows a tool name can invoke it directly regardless of the configured restriction mode. The access control was effectively cosmetic. This issue has been patched in version 3.6.0.

Idira Endpoint Privilege Manager Agent versions prior to 26.5 exhibit improper access control within high-privileged agent components. A local, low-privileged attacker could exploit this by manipulating an internal communication mechanism or file operation. Under specific circumstances, this could potentially allow the attacker to bypass permission restrictions and execute unauthorized local actions with elevated privileges. CyberArk Security Bulletin: CA26-19

The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.4. An app may be able to bypass launch constraint protections and execute malicious code with elevated privileges.

A parsing issue in the handling of directory paths was addressed with improved path validation. This issue is fixed in macOS Sequoia 15.4. An app may be able to access sensitive user data.

MariaDB server is a community developed fork of MySQL server. Versions 10.6.1 through 10.6.26, 10.11.1 through 10.11.17, 11.4.1 through 11.4.11, 11.8.1 through 11.8.7, and 12.3.1 with `wsrep_notify_cmd` enabled would execute shell commands embedded in the name of the joiner node. This is fixed in 10.6.27, 10.11.18, 11.4.12, 11.8.8, and 12.3.2. As a workaround, anyone who cannot upgrade now should disable `wsrep_notify_cmd`.

aiograpi is an asynchronous Instagram API for Python. aiograpi versions before 0.9.10 accepted server-supplied signup challenge paths and used them to build request URLs before validating that the paths were relative Instagram API paths. If an attacker can influence a challenge response, for example through a local network, DNS, or proxy compromise, challenge handling requests could be sent outside the intended Instagram host with the client's existing session headers. Version 0.9.10 validates challenge paths before building URLs, solving captcha challenges, or submitting phone/SMS challenge forms.

Fediverse Embeds embeds fediverse posts on WordPress sites. Prior to version 1.5.9, Fediverse Embeds registered the unauthenticated AJAX action wp_ajax_nopriv_ftf_get_site_info (includes/Site_Info.php) that verified a nonce ftf-fediverse-embeds-nonce and then called file_get_html($site_url) on the attacker-supplied URL. The same nonce was enqueued onto every public page containing a fediverse embed (via includes/Enqueue_Assets.php lines 41-46 + includes/Helpers.php lines 64-83), so the nonce gate was not an authentication boundary; any visitor of a public post with an embed could grab it and reuse it. This issue has been patched in version 1.5.9.

Fediverse Embeds embeds fediverse posts on WordPress sites. Prior to version 1.5.8, Fediverse Embeds registered an unauthenticated REST route ftf/media-proxy (includes/Media_Proxy.php) with permission_callback => __return_true that accepted a base64-encoded URL and forwarded it to wp_remote_get($url) without enforcing any allowlist. The plugin's source contained a comment block explicitly acknowledging that the request should be validated against allowed fediverse domains, but in 1.5.7 the validation only set a local $can_download_media flag that was never read. The full response body was echoed back to the caller, so this was a full-read SSRF / open proxy reachable by any anonymous visitor. This issue has been patched in version 1.5.8.

tmp is a temporary file and directory creator for node.js. In version 0.2.6, the _assertPath guard added to tmp rejects only string values that contain the substring ... It is bypassed when prefix, postfix, or template is supplied as a non-string value (Array, Buffer, or any object) whose includes('..') returns falsy but whose stringification still contains ../. The value flows through Array.prototype.join/String coercion inside _generateTmpName and path.join(tmpDir, opts.dir, name), producing a final path that escapes tmpdir and creates a file or directory at an attacker-controlled location with the host process's privileges. This affects any application that forwards untrusted request data (a common pattern is JSON body fields or qs-parsed bracket-array query strings such as ?prefix[]=...) into tmp.file, tmp.fileSync, tmp.dir, tmp.dirSync, tmp.tmpName, or tmp.tmpNameSync without explicit type coercion. This vulnerability is fixed in 0.2.7.

tmp is a temporary file and directory creator for node.js. Prior to 0.2.6, the tmp npm package contains a path traversal vulnerability that allows escaping the intended temporary directory when untrusted data flows into the prefix, postfix, or dir options. By embedding traversal sequences (e.g., ../) or path separators in these parameters, attackers can cause files to be created outside the configured temporary base directory at attacker-controlled locations with the privileges of the running process. This vulnerability affects applications that pass user-controlled data to tmp's file/directory creation functions without proper input sanitization. This vulnerability is fixed in 0.2.6.

Axios is a promise based HTTP client for the browser and Node.js. Axios versions before 0.32.0 on the 0.x line and before 1.16.0 on the 1.x line build a regular expression from the configured XSRF cookie name without escaping regex metacharacters. In standard browser environments, an attacker who can influence the cookie name passed to axios can cause expensive regex backtracking while axios reads document.cookie. The practical impact is client-side availability degradation, such as freezing the affected browser tab while axios prepares a request. The issue does not affect ordinary Node.js HTTP adapter usage, React Native, or web workers, where axios does not read document.cookie. This vulnerability is fixed in 0.32.0 and 1.16.0.

Axios is a promise based HTTP client for the browser and Node.js. From 0.19.0 to before 0.31.1 and 1.15.2, Axios contains prototype-pollution gadgets in request config processing. If another vulnerability in the same JavaScript process has already polluted Object.prototype.transformResponse, affected Axios versions may treat that inherited value as request configuration or as an option validator. Axios does not itself create the prototype pollution. Exploitability requires a separate prototype-pollution vulnerability or equivalent attacker control over Object.prototype before Axios creates a request. This vulnerability is fixed in 0.31.1 and 1.15.2.

Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios does not normalise IPv4-mapped IPv6 addresses. When NO_PROXY lists an IPv4 address such as 127.0.0.1 or 169.254.169.254, a request URL using the IPv4-mapped IPv6 form (::ffff:7f00:1, ::ffff:a9fe:a9fe) still routes through the configured proxy. Node.js resolves these addresses to the underlying IPv4 host, so the request reaches the internal service via the proxy rather than being blocked. This vulnerability is fixed in 0.32.0 and 1.16.0.

Axios is a promise based HTTP client for the browser and Node.js. From 1.15.2 to before 1.16.0, nested objects created by utils.merge() (e.g., config.proxy) are still constructed as plain {} with Object.prototype in their chain. The setProxy() function at lib/adapters/http.js:209-223 reads proxy.username, proxy.password, and proxy.auth without hasOwnProperty checks. When Object.prototype.username is polluted, setProxy() constructs a Proxy-Authorization header with attacker-controlled credentials and injects it into every proxied HTTP request. This vulnerability is fixed in 1.16.0.

PostgreSQL Anonymizer contains a vulnerability that allows a user to gain superuser privileges by creating a JSON document and placing malicious code inside a particular key-value pair. If a superuser calls the import_database_rules() or import_roles_rules() functions, the malicious code is executed with superuser privileges. The problem is resolved in PostgreSQL Anonymizer 3.1.1 and further versions

Perry before 0.5.1159 contains a path traversal vulnerability that allows a malicious build server to write arbitrary content to any location writable by the running process by supplying unsanitized path components in the artifact_name field of ArtifactReady WebSocket messages. Attackers controlling the server URL can deliver traversal payloads through the artifact_name or download_path fields, causing the client to overwrite sensitive files or expose arbitrary local files to an attacker-accessible location.

IBM Langflow Desktop 1.0.0 through 1.9.2 IBM Langflow is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks.

Unrestricted upload of file with dangerous type vulnerability in Başarsoft Information Technologies Inc. Rotaban allows Upload a Web Shell to a Web Server. This issue affects Rotaban: from V2026.06.002 before V2026.06.003.

Guzzle Services provides an implementation of the Guzzle Command library that uses Guzzle service descriptions to describe web services, serialize requests, and parse responses into easy to use model structures. Versions prior ro 1.5.4 do not safely serialize scalar XML element values containing the CDATA terminator `]]>`. The XML request serializer writes values containing `<`, `>`, or `&` with `XMLWriter::writeCData($value)`. If attacker-controlled input contains `]]>`, the CDATA section closes early and the remainder is interpreted as XML markup. This is an outgoing request-body integrity issue, not a response parsing issue. The attacker does not need to control the service description or schema. Users are affected when all of the following are true: the application uses `guzzlehttp/guzzle-services` to serialize outgoing requests; a request parameter or `additionalParameters` schema uses `location: xml`; the value is serialized as XML element text, not an XML attribute; the value can contain attacker-controlled, user-controlled, tenant-controlled, or otherwise untrusted input; the value is not constrained by a safe `enum`, `pattern`, or custom filter that excludes `]]>`; and the downstream service parses the generated XML structurally and may act on unexpected, duplicated, or injected elements. Applications that serialize untrusted input into `location: xml` request parameters can emit XML containing attacker-controlled elements outside the intended text node. Depending on the receiving service, this can alter operation semantics, smuggle privileged fields, bypass modeled parameter boundaries, or create conflicting duplicated elements. Fixed service descriptions are sufficient if they contain an XML element parameter populated from attacker-controlled input. Users are not directly affected if they only use Guzzle Services to deserialize HTTP response bodies. Response XML parsing uses the response XML location visitor and does not invoke the vulnerable request XML serializer. Response bodies matter only in a second-order flow, such as parsing attacker-controlled response XML, storing or forwarding a parsed string value, and later using it as a `location: xml` request parameter. The issue is patched in `1.5.3` and later by safely splitting embedded CDATA terminators before serialization. The fix preserves the original scalar value as XML text and prevents injected nodes. As a workaround, constrain attacker-controlled XML element values with a strict `enum`, `pattern`, or custom filter that excludes `]]>`, or avoid serializing untrusted data into `location: xml` element text until patched. Where appropriate for the service schema, XML attributes are not affected because they are written with XMLWriter attribute APIs rather than CDATA sections. To determine whether action is needed, search service descriptions for request parameters using `location: xml`, including operation `parameters` and `additionalParameters`. Response-only `models` are not directly affected unless parsed values are reused for request serialization. For object and array parameters, review nested scalar properties because leaf element values can still be affected.

SQL Injection vulnerability in damasac thaipalliative_lte through version 3.0 allows remote attackers to execute arbitrary SQL commands via the idFormMain parameter to /substudy/ezform.php (line 14) and the id parameter (line 49). The parameters are concatenated directly into SQL queries without sanitization or parameterized statements.

Keras versions prior to 3.14.0 are vulnerable to a path traversal issue in the archive extraction utilities located in `keras/src/utils/file_utils.py`. The functions `filter_safe_tarinfos()` and `filter_safe_zipinfos()` validate archive member paths against the process current working directory (CWD) instead of the actual extraction destination. When the process runs with CWD set to `/`, which is common in Docker containers, CI/CD runners, and Jupyter environments, the validation boundary becomes the filesystem root, allowing traversal paths to bypass the security check. Additionally, the zip filter contains a bug that causes an `AttributeError` when a blocked entry is encountered, leading to incomplete extraction. Furthermore, Python 3.11 installations lack the `filter="data"` safety net, leaving them entirely reliant on the flawed CWD-based filter. Exploitation of this vulnerability can result in arbitrary file writes outside the intended extraction directory, enabling attackers to overwrite configuration files, inject malicious code, or corrupt machine learning datasets and pipelines.

Unrestricted upload of file with dangerous type vulnerability in Limatek System Inc. LimRAD NAC allows Remote Code Inclusion. This issue affects LimRAD NAC: before 5.5.7.3.9.

guzzlehttp/psr7 is a PSR-7 HTTP message library implementation in PHP. Versions prior to 2.10.2 did not reject ASCII control characters, whitespace, or DEL in first-party URI host components. A vulnerable flow is: First, an application accepts a user-controlled URL. Second, the URL is used to construct a PSR-7 `Uri` or `Request`. Third, the host component contains CRLF or another header-unsafe character. Fourth, the host is copied into the PSR-7 `Host` header when no explicit `Host` header is provided. Finally, the request is serialized or sent by an HTTP client that does not independently reject the malformed host. In that flow, an attacker can cause the serialized request to contain additional attacker-controlled header lines. For example, a host containing `"\r\nX-Injected: yes"` can cause the generated `Host` header to span multiple HTTP header lines. Applications are affected when they use user-controlled URLs for outbound HTTP requests, URL forwarding, proxying, crawling, webhook delivery, or similar request-dispatch flows. In deployments involving HTTP/1.1 connection reuse, proxies, gateways, or load balancers, this malformed request may also contribute to request smuggling or cache poisoning, depending on how downstream components parse the request. The issue is patched in `2.10.2` and later. `1.x` is end-of-life and will not receive a patch. As a workaround, validate and reject all untrusted URI strings before constructing PSR-7 `Uri` or `Request` instances. Reject input containing ASCII control characters, whitespace, or DEL, including CRLF, tab, space, NUL, or DEL characters. Applications that forward requests should also ensure the final HTTP client or serializer rejects invalid URI and header data before writing requests to the network.

guzzlehttp/psr7 is a PSR-7 HTTP message library implementation in PHP. Versions prior to 2.10.2 contain improper Host header validation when parsing raw HTTP request messages and when deriving a server request URI from server variables. An attacker can provide a malformed Host header containing URI authority delimiters, such as `[email protected]`. When the Host value is used to construct a URI, the malformed value can be reinterpreted as URI userinfo and host. This can cause the PSR-7 request URI host to differ from the original Host header value. Applications are affected if they parse attacker-controlled raw HTTP requests with `GuzzleHttp\Psr7\Message::parseRequest()` or the legacy 1.x `GuzzleHttp\Psr7\parse_request()` function, or if they build server requests from attacker-controlled server variables, then rely on the resulting URI host for routing, allow-list checks, or forwarding decisions. In affected forwarding or gateway scenarios, this may cause requests or credentials to be sent to an unintended host. The issue is patched in `2.10.2`. `1.x` is end-of-life and will not receive a patch. Some workarounds are available. Validate the `Host` header as `uri-host [ ":" port ]` before calling `Message::parseRequest()` or legacy `parse_request()` on untrusted HTTP request data, or before deriving routing and forwarding decisions from a parsed request URI. Reject Host values containing userinfo, path, query, or fragment delimiters.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.10 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an authenticated user to read arbitrary files from the Gitaly server and access internal network resources during repository import, due to insufficient validation of secondary URLs.

GitLab has remediated an issue in GitLab EE affecting all versions from 13.1.4 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an authenticated user to add unauthorized email addresses to a targeted user's account due to improper sanitization of user-supplied input in certain group setting fields.

Golem OEE MES is vulnerable to an unauthenticated path traversal flaw. This vulnerability allows an attacker in the same local network to read arbitrary files from the server's operating system by manipulating HTTP request paths. This issue has been fixed in version 11.6.0

GitLab has remediated an issue in GitLab EE affecting all versions from 13.9 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an authenticated user with Security Manager-role permissions to manage project security configuration even when the relevant feature was in a disabled state, due to incorrect authorization enforcement.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.10 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an authenticated user with developer-role permissions to modify hidden merge requests due to incorrect authorization enforcements.

A Missing Authorization vulnerability in the playbook import functionality in Dialogflow CX on Google Cloud Platform allows an authenticated user with specific roles to escalate privileges and potentially take over a GCP project using a maliciously crafted playbook import. This vulnerability was patched on 15 March 2026, and no customer action is needed.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.0 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an authenticated user to access confidential issue details due to incorrect authorization checks.

GitLab has remediated an issue in GitLab EE affecting all versions from 17.1 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an authenticated user with developer-role permissions to execute arbitrary client-side code on behalf of a targeted user due to improper input sanitization in the Analytics Dashboard.

Missing Authorization vulnerability in Sparkle WP MetroStore metrostore allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects MetroStore: from n/a through 1.3.2.